Find by ZIP
(833) 728-2327Calls answered 24/7

Burst Pipe Water Damage Cleanup

Burst Pipe Water Damage Cleanup for homes and businesses: what it covers, how it works, what it costs and how to book it by phone.

Call (833) 728-2327
  • Calls answered 24/7
  • Written estimate before work starts
  • Water removal, drying and repair
  • Homes and businesses

Summarize this page with AIChatGPTGoogle AICopilot

Technical drawing of burst pipe cleanup: frozen pipe damage, water heater leaks and appliance supply line failures.
Burst Pipe Water Damage Cleanup covers frozen pipe damage, water heater leaks and appliance supply line failures.

From your call to a written estimate

  1. Call (833) 728-2327

    Tell the person who answers what got wet and where the water came from. Calls are answered 24/7.

  2. Stop the source

    You get help shutting off the water or the power to a wet room while the crew is on the way.

  3. Inspection and written estimate

    Moisture readings, photos and a written estimate come before any work begins.

Call (833) 728-2327

Burst Pipe Water Damage Cleanup is one of the water damage services 911 Water Damage Fix books in every city it lists.

Calls are answered 24/7 at (833) 728-2327.

Burst Pipe Water Damage Cleanup in short

Burst pipe cleanup is the water removal, drying and repair after a supply pipe, fitting or water heater fails. The water is usually clean, but it is under pressure, so a split pipe can soak several rooms in minutes. Shut off the main valve first, then call for extraction and drying. The pipe itself is a plumbing repair.

What is part of burst pipe cleanup

Burst pipe cleanup handles the water a failed supply line puts into a house: a frozen pipe that split, a fitting that let go, a burst washing machine hose or a leaking water heater.

Supply lines carry water under pressure, so a split pipe keeps pumping water until the valve is closed. Find the main shutoff before you need it: it is usually where the water line enters the house, near the meter, the water heater or a basement wall.

Water from a supply line is usually Category 1, which means carpet and some drywall can often be dried in place if extraction starts quickly. Water that sits, or that ran through a ceiling and picked up debris, can move to a dirtier category.

  • Extraction of water from every room it reached
  • Moisture mapping above, below and beside the break
  • Opening walls or ceilings to reach the wet cavity
  • Structural drying
  • Repairs after drying

Jobs inside burst pipe cleanup

  • Frozen pipe damage

    Pipes in exterior walls, attics and crawl spaces can split when water freezes; the leak often starts when they thaw.

  • Water heater leaks

    A tank that fails can release its full volume onto the floor; the area is extracted and dried and the tank replaced by a plumber.

  • Appliance supply line failures

    Washing machine hoses, dishwasher lines and refrigerator lines fail without warning and soak cabinets and floors.

  • Leaks inside walls and ceilings

    A thermal camera and meters show how far water ran inside a wall or ceiling before it showed.

Burst pipe cleanup: the steps

  1. Shut off the main

    Close the main water valve and open a low faucet to drain the lines.

  2. Call

    Say where the pipe broke and how long it ran.

  3. Extract and map

    Water is removed and meters show how far it went, including below and beside the break.

  4. Dry, then repair

    The wet area dries with readings logged, the plumber fixes the pipe, and the walls and floors are repaired.

When to call for burst pipe cleanup

  • Water spraying or pouring from a wall, ceiling or fixture
  • A ceiling bulge under a bathroom
  • Low water pressure and a running meter with nothing on
  • No water from a faucet on a freezing night, then a leak once it thaws

Before you call

  • Shut off the main water valve.
  • Turn off power to wet rooms at the breaker if it is safe to reach.
  • Photograph the break and the wet rooms.
  • Call a plumber for the pipe itself.

Typical prices for burst pipe cleanup

Typical ranges from published cost guides, not quotes. The written estimate after an inspection is the price that applies.

ItemTypical rangeUnit
Burst pipe repair, plumbing only$400 to $2,000per repair
Burst pipe repair with related water damage$1,000 to $4,000per job

Typical US ranges compiled on 17 October 2026 from public cost guides and price lists, not prices from 911 Water Damage Fix or any one company. Most guide figures trace back to Angi and HomeAdvisor customer surveys (HomeAdvisor water damage cost guide, updated June 17, 2026); independent checks: HomeGuide (2025 and 2026), Fixr (January 2025), a State of Iowa restoration contract price list effective May 22, 2026, and a published restoration equipment rental list. The written estimate after an inspection is the only price that applies.

burst pipe cleanup price ranges

What drives the price

  • How long the pipe ran before the water was shut off.
  • How many rooms and floors the water reached.
  • Opening walls and ceilings to reach the break.
  • Drying days.
  • The plumbing repair, priced separately.

Insurance and who pays

A standard homeowners policy usually lists sudden, accidental discharge of water from plumbing, heating, air conditioning or appliances as a covered peril, according to the Insurance Information Institute (Triple-I). Damage from a slow leak or poor upkeep is usually excluded, and so is mold.

Whoever pays, the insurer will want proof: photos before anything is moved, moisture readings, a list of damaged items and the written estimate. Restoration companies document all of this as part of the job, and you deal with your own insurer about the claim.

Burst pipe cleanup questions

How much does water damage restoration cost?

Most home jobs fall between about $1,300 and $6,400, based on HomeAdvisor's 2026 survey, with an independent HomeGuide range of $2,000 to $6,000. A small clean-water leak can be $150 to $500, while water that sat through much of a house can pass $15,000. Water removal and drying run about $3 to $12 per square foot, depending on whether the water was clean, gray or sewage. The written estimate after an inspection is the price that applies.

What should I do right after water damage?

Stop the water first: close the main shutoff valve or the valve under the fixture. Turn off power to wet rooms at the breaker if you can reach the panel without stepping in water. Photograph every wet room before you move anything, lift furniture off wet carpet, and move papers and electronics to a dry room. Then call for extraction and drying, because the EPA advises drying wet materials within 24 to 48 hours to prevent mold.

What is the difference between water mitigation and water restoration?

Mitigation stops the damage from getting worse: extracting water, removing wet materials that cannot be saved and drying the structure until moisture readings reach a dry standard. Restoration is the whole job, which includes mitigation and then the repairs: new drywall, flooring, ceilings, trim and paint. Insurers often see the two as separate line items on the estimate, and some companies only do the mitigation part.

How long does it take to dry out water damage?

Drying usually takes several days, and the moisture readings decide when it is done, not the calendar. Clean water caught early in carpet and drywall dries faster than water that soaked into hardwood, plaster or subfloor for days. Equipment is billed per unit per day, so ask for the daily readings: they show which areas have reached the dry standard and when the air movers and dehumidifiers can come out.

Does homeowners insurance cover water damage?

Often, for sudden damage. According to the Insurance Information Institute, standard homeowners policies list accidental discharge of water from plumbing, heating, air conditioning or appliances as a covered peril. Gradual leaks, poor upkeep and mold are usually excluded. Flooding from outside needs a separate flood policy, and sewer backup needs an endorsement. Check your own policy and call your insurer; the restoration company documents the damage for your claim.

Will mold grow after water damage?

It can. The EPA advises drying water-damaged materials within 24 to 48 hours to prevent mold growth, which is why extraction and drying start on the first visit. If water sat longer, or a musty smell shows up after a leak was cleaned, ask for moisture mapping of the walls and floors. Mold that has already grown is a separate job from drying, priced separately, and standard homeowners policies usually exclude it.

What are the categories of water damage?

The IICRC S500 standard sorts water into three categories. Category 1 is clean water, such as a broken supply line. Category 2 is gray water with some contamination, such as a washing machine or dishwasher overflow. Category 3 is grossly contaminated water, such as sewage or flooding from a river or storm runoff. The category decides what can be dried in place and what must be thrown away, and it moves the price.

How do I choose a water damage restoration company?

Ask four things on the first call or visit: whether the company holds the contractor or restoration license your state requires, a current insurance certificate, a written estimate before any work, and daily moisture readings during drying. Read any contract before signing, and never sign over your insurance benefits under pressure. A company that documents the job with photos and a drying log makes your insurance claim easier.

Other water damage services

Calls answered 24/7 in your home

Calls answered 24/7. The estimate is in writing before work begins.

Call (833) 728-2327Calls answered 24/7
Call (833) 728-2327, answered 24/7